Product code: ESC-CALA
A single-piece UHPC drinking fountain with two push-button taps at different heights – accessible to all.
Cala is an outdoor drinking fountain designed from the outset around universal accessibility, so that everyone – including people with reduced mobility – can use it independently. The single-piece UHPC body houses the supply and drainage pipework, and two low-effort push-button taps are set at different heights.
| Material | reinforced UHPC (ultra-high-performance concrete); push-button dispensers in polished AISI 316L stainless steel; shot-blasted stainless steel trim; A2–A4 stainless steel screws |
| Surface and finish | smooth polished UHPC, waterproofed; rounded edges with no sharp corners |
| Dimensions | 133 × 74 × 37 cm; lower water outlet at 89 cm with clear space underneath for a wheelchair |
| Weight | 125 kg |
| Installation | embedded in the base and bolted |
| Designer | Escofet Lab |
| Manufacturer | Escofet (Barcelona, Spain) |
Parks, squares, playgrounds and sports areas, school grounds and other public spaces where access for all matters.
Install the fountain on a level, hard surface and keep the front approach clear so wheelchair users can reach it comfortably. Plan the water supply and drainage connections in advance.
An outdoor drinking fountain lets people drink water without a plastic bottle – visitors can refill their own bottles. This is especially appreciated on hot days, when water is available without going into a shop or café, and the public space becomes more convenient.
Wherever people spend more time: in parks and squares, town squares, near sports grounds and stadiums, schools, children's playgrounds, running and cycle paths, and on beaches.
A drinking fountain needs a mains water supply and a drainage connection, so it is worth agreeing its location while the site is still being planned. Check the connection requirements for a specific model with our consultants.
During the cold season the water must be turned off so that the system does not freeze. It is worth planning for this in advance when designing the water supply connection.
Both drinking fountains are designed for public outdoor use. Beata suits parks, squares, town squares and school grounds, while Escape suits active leisure areas: sports grounds, running and cycle paths, and beaches. Check materials and colours with our consultants.
Yes, we deliver and install throughout Lithuania. Installation and transport prices are by agreement and are agreed in advance – contact us on +370 652 32015, info@viskasmiestui.lt.