Product code: UG-5
A wider, one-metre hoop covered in rubber – the paintwork of an expensive bike won't get scratched even when the frame is leaned against the rack.
Carbon or aluminium frames, road bikes and e-bikes are expensive, so their owners avoid metal racks that leave scratches when a bike is leaned against them. The UG-5 hoop is covered with 30 mm rubber: the bike rests against a soft surface and the frame stays undamaged. The one-metre-long structure gives more room to lean the frame or lock both wheels.
| Dimensions (length × width × height) | 1000 × 50 × 900 mm |
| Profile | 50 × 50 × 2 mm |
| Base plate | 150 × 150 mm |
| Number of spaces | 2 bikes |
| Material | steel, galvanised and powder-coated |
| Protective layer | rubber, 30 mm wide |
| Weight | 8.5 kg |
| Fixing | bolt-down – 8 nylon anchors Ø10 × 80 mm with Ø7 × 80 mm screws (included) – or set in concrete to a depth of 300 mm |
Outside bike shops and repair services, sports clubs, hotels and offices with cycling staff – anywhere more expensive bikes are left.
If space is tighter, the UG-3 of the same design has an 800 mm hoop. Simply wipe the rubber with a damp cloth from time to time – a clean surface leaves no marks on the frame.
First decide how many bikes need to be parked and where the rack will stand – outdoors on paving or indoors against a wall. Then consider whether it is important to lock the bike frame: U-shaped hoops are best for this. Finally, choose the material and colour to suit the surroundings.
Calculate based on peak season, when there are the most bikes, and leave some spare capacity. Some racks are made with different numbers of spaces or are modular, so spaces can be added later. Double-sided racks allow bikes to be parked on both sides and save space.
Most racks are bolted into firm paving with anchors, and some models can be set in concrete. Wall-mounted holders are fixed to the wall with anchors. For many models, anchors are included – this is stated in the product's technical data.
Yes. In this category you will find racks and wall-mounted holders designed for wider tyres and heavier bikes, as well as an e-bike station with a charging socket. The permitted tyre width or wheel gap for each model is stated in the product description. Compare it with your bike's tyres before buying.
Hot-dip galvanised and powder-coated steel is corrosion-resistant and lets you choose a colour. Stainless steel is unpainted, keeps its shiny look for a long time and suits prestigious locations. Both options are suitable for year-round outdoor use.
It is safest to lock the bike by the frame, not just the wheel – U-shaped hoops and similar racks are designed for this. Models with protective rubber keep the bike's paintwork free of scratches. Place the rack in a clearly visible and well-lit location.
Wall-mounted holders come in handy in bike rooms, garages and basements, where floor space is limited. A bike hung vertically takes up less space, and swivelling holders allow bikes to be placed closer together. Note the minimum room height stated in the description.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. When planning a larger bike parking area, the installation diagram in the “Technical information” section is also helpful.
