Concrete Tree Grate Icaria

Product code: ESC-ICARIA

A two-piece concrete tree grate with a surface sloping inwards – it continues the texture of the paving and collects rainwater.

  • Material: reinforced grey concrete, etched and waterproofed
  • Dimensions: 120 × 120 × 20 cm, central opening Ø55 cm
  • Weight: 402 kg
  • Installation: set flush with the paving
Have any questions about this item? Ask

Icaria – a concrete tree grate that continues the paving

Icaria (1991) was designed for Avenida Icaria in Barcelona's Olympic Village. It consists of two symmetrical pieces with a 55 cm central opening, and its surface slopes slightly inwards – so it becomes part of the paving and channels rainwater to the tree. The form makes a smooth transition from the orthogonal geometry of the paving to the circular opening.

Technical data

Materialreinforced concrete
Surface and finishetched and waterproofed; grey
Dimensions120 × 120 × 20 cm, central opening Ø55 cm
Weight402 kg
Installationembedded flush with the paving
DesignerEsteve Bonell
ManufacturerEscofet (Barcelona, Spain)

Certificates: Susterra.

Where it fits

Avenues, boulevards, station squares and tree-lined pavements – where a continuous paved surface without raised kerbs is wanted.

Tip

The grate is installed together with the paving, so plan its position and level at the paving design stage.

Concrete or Cor-Ten planter – which should I choose?

Concrete planters are heavy and stable, with a stone chip finish, so they also work as a natural barrier to traffic. Cor-Ten steel planters are much lighter, with modern shapes and a warm brownish tone, and go well with wood, concrete and greenery. Choose according to whether the planter needs to restrict traffic or mainly decorate the surroundings.

Does an outdoor planter need to be fixed?

Concrete planters stand firmly without any fixings thanks to their weight. Cor-Ten planters are lighter, but they weigh much more when filled with soil. In locations exposed to wind, place tall, narrow planters on a level base, choose plants that are not too tall, or fix them to a wall.

How do I prepare a planter for plants?

Plants need drainage so that the roots do not stand in water. Put a layer of gravel at the bottom and a suitable growing medium on top. Cor-Ten planters have drainage holes in the bottom, so excess water drains away by itself.

Does a Cor-Ten planter rust and leave stains?

A stable rust patina forms on the surface of Cor-Ten steel, protecting the metal and giving it a brownish tone. For the first few months, until the patina stabilises, the planter may leave brownish marks on light-coloured paving. So at first it is better to place it on darker surfacing or where such marks will not matter.

Can a planter restrict car traffic?

Yes, heavy concrete planters are often used to separate a pedestrian zone from the roadway and prevent cars from driving onto the pavement. Long planters are suitable for enclosing café terraces or small areas. This restricts traffic while also decorating the surroundings with greenery.

How is a heavy planter delivered and positioned?

Concrete planters are heavy, so it is worth planning their location in advance – moving them later would be difficult. They are delivered and positioned with lifting equipment, and the largest models require a crane. The exact weight of each planter is stated in the product's technical data.

Can planters be matched with other outdoor furniture?

Yes. Concrete planters can be matched with concrete benches and waste bins in the same finish, while Cor-Ten planters go well with wooden equipment. Some planters belong to the same series as benches, so the space looks coherent.

Do you deliver and install planters?

Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. Before delivering a heavy planter, we will discuss access and the installation location.

Related Products
A cube-shaped monobloc concrete planter with a large internal volume for trees or shrubs. Material:..
Write
Call us