Product code: VMN-006
One of the most compact structures in the ROBIN collection – a 3.35 × 3.24 m footprint and 2.2 m high.
Flap is a good choice when only a small area is available for the playground. The structure measures 3350 × 3240 mm and is 2200 mm high. It is one of the most compact play structures in the ROBIN collection, with the same natural style: robinia (acacia) wood and steel parts.
| Collection | ROBIN |
| Dimensions (length × width × height) | 3350 × 3240 × 2200 mm |
| Material / construction | robinia (acacia) wood; steel parts – galvanised and powder-coated or stainless steel |
| Age group | from 3 years |
| Number of users | up to 8 |
| Minimum safety zone | 6.79 × 6.24 m |
| Free fall height | 0.90 m |
| Impact area | 27.41 m² |
| Foundation depth | 0.60 m |
| Standard compliance | EN 1176-1:2024 |
| Accessibility | equipment with difficult access (according to EN 1176-1) |
Small courtyards, kindergarten group playgrounds, play corners at cafés and rest areas, and smaller public gardens.
Flap can be installed as a stand-alone unit or as part of a larger ROBIN playground – for example, next to Nestify.
The safety zone is the area around a piece of play equipment needed to play, jump off or fall safely. It must be free of other equipment, benches, fences, trees or hard obstacles. The safety zone area of each piece of equipment is stated in the product description, so when planning a playground, add up the zones of all the equipment and make sure they fit on the plot.
Fall height indicates the highest point from which a child can fall while using the equipment. It determines what surfacing is needed under and around the equipment. The specific fall height of each piece of equipment is stated in the product description.
Under equipment, especially equipment with a greater fall height, impact-absorbing surfacing is needed – for example sand, gravel or rubber surfacing. The greater the fall height, the more carefully the type and thickness of surfacing must be chosen. The equipment data used to choose the surfacing is stated in each product description.
The recommended age group is stated in each product description. Spring riders and seesaws are usually intended for the youngest, while climbing walls and larger play structures are for older children. When planning a playground for a kindergarten or apartment block courtyard, combine equipment for different age groups.
FRESH – equipment for the very youngest, recommended for nurseries and kindergartens. It is made of coloured HDPE panels and hot-dip galvanised, powder-coated steel, so it is bright and easy to maintain. ROBINIA – equipment made of robinia (acacia) wood, which is exceptionally weather-resistant. Its natural, minimalist design suits parks, school grounds and apartment block courtyards. You will find the suitable age group and safety zone in each product description.
The category descriptions state that the playground equipment complies with the EN 1176 standard. The standard and certificates applicable to a specific piece of equipment are stated in the product description. If you are taking part in a public procurement, check the required documents when ordering.
Regularly inspect the fixing bolts, springs, chains and seats, and tighten any loose joints. Check the condition of the surfacing around the equipment every season. Surfaces coated with anti-graffiti paint are easy to clean, and by the sea it is worth checking metal parts more often.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. The equipment is fixed on a stable base, so we will discuss the installation location and foundation in advance.
