KS2600 Backless Park Bench, 1968 mm

Product code: DS-KS2600

KS2600 is a 1968 mm backless bench with rectangular-frame steel legs and a tropical hardwood seat.

  • Dimensions: 1968 × 400 × 450 mm
  • Metal finish: hot-dip galvanised and painted in a RAL colour, or painted in a RAL colour
  • Wood: FSC® certified sapele, iroko or lotofa (tropical hardwood)
  • Installation: nylon anchors
Have any questions about this item? Ask

KS2600 – a backless bench almost two metres long

KS2600 is a 1968 mm long, 400 mm deep backless bench with rectangular-frame steel legs. The long, narrow tropical hardwood seat suits the edges of sports grounds, paths and squares.

Advantages

  • 1968 mm length – room for four.
  • Rectangular-frame legs – clean lines.
  • Tropical hardwood – sapele, iroko or lotofa.
  • Corrosion protection – hot-dip galvanising and RAL paint.

Technical data

CodeKS2600
Dimensions (length × width × height)1968 × 400 × 450 mm
Materialsteel and wood
Metal finishhot-dip galvanised and painted in a RAL colour, or painted in a RAL colour
WoodFSC® certified sapele, iroko or lotofa (tropical hardwood)
Backrestnone
Installationfixed with nylon anchors to a hard surface (paving blocks or concrete)

Where it fits

Streets and pavements, squares and plazas, parks and relaxation areas, edges of sports grounds.

Tip

The bench with a backrest from the same range is KS2610.

Bench with or without a backrest – which to choose?

For seating areas, parks and courtyards, benches with a backrest are a better fit – they are more comfortable for longer stays. In transit areas, at bus stops and near schools, backless benches are usually enough; they take up less space and can be sat on from both sides. For longer sitting, models with armrests or a higher backrest are more comfortable for older people.

Concrete, steel or with wood – what's the difference?

Concrete benches are heavy and stable, suitable for squares and busy places. Steel benches with a galvanised and painted frame are lighter, so they are fixed to the base. Wooden slats on the seat are warmer and more pleasant than metal or concrete.

Does an outdoor bench need to be fixed?

Heavy concrete benches usually stand stably without anchors. In public places it is recommended to fix steel benches to the base so that they are not moved around or carried off – anchors are included for some models. When placing on sand or gravel, small concrete footings are first poured under the legs.

What wood is used and how should it be cared for?

Seats use impregnated and painted black alder, spruce, pine or other softwood, as well as weather-resistant acacia. For some models, composite can be chosen instead of wood. Clean the wood regularly, and when the coating wears, renew it with protective paint or oil.

Can I choose the colour of the bench?

The frames of steel benches are powder-coated, in most cases in the RAL palette. For concrete benches you can choose stone chips in different shades, and the wood is painted or oiled. Check the available options when ordering.

Are there modular and curved benches?

Yes. Modular benches allow you to create a seating line of the desired length or shape, and curved segments a circular seating area around a tree or flower bed. There are also benches with an integrated bike rack, which suit school or office entrances.

Can an outdoor table be matched with benches?

Yes, it is worth choosing a table together with benches from the same series – the surroundings then look coherent and the dimensions match each other. Like benches, outdoor tables must be sturdy, moisture-resistant and easy to maintain. You can also choose a waste bin from the same line for the seating area.

Do you deliver and install benches?

Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. Heavy concrete benches are delivered and positioned with lifting equipment.

Related Products
KS2310 – a 2000 mm bench with a spruce backrest and seat on C-shaped steel sides. Dimensions: 2000 ..
KS2410 – a frame bench with a backrest and armrests; wood: sapele, iroko, lotofa or spruce. Dimensi..
KS2500 – a narrow, 410 mm deep backless bench with slanted steel legs. Dimensions: 1812 × 410 × 450..
KS2510 – a bench with a vertical slat backrest, 6 mm steel plate sides and sapele or iroko timber. ..
Alternative products
KS2610 – a framed bench with a backrest, 1968 mm long, with a tropical hardwood seat and backrest. ..
Write
Call us