Product code: IKS ONE
A standalone rack module with three support points – the wheel rests on the structure while the spokes stay untouched. Several modules can be arranged in any line.
Not every bike parking area is straight: in some places the racks need to be arranged around a tree, in others they follow the curve of a pavement or fill a corner. IKS ONE is a standalone module, so several racks can be placed in a row, at an angle or in a semicircle. Its structure has three support points: the wheel of a parked bike touches the structure, but the spokes remain free.
| Construction | welded from 60×20 mm bent rectangular tube and flat steel |
| Dimensions | 605 × 95 × 825 mm (width × depth × height) |
| Support points | 3 |
| Weight | 10 kg |
| Finish | galvanised and powder coated, colour to RAL (other colours on request) |
| Coating thickness | hot-dip galvanising ~80 µm (also in internal cavities) + powder coating, total thickness ~200 µm |
| Fixing | fixed with 4 M10 nylon anchors, on top of or beneath the surface |
| Layout | in a row, at an angle, in a semicircle, double-sided |
Architecturally distinctive locations: squares around trees, small parks, university campuses and courtyards of new developments where bike parking is planned together with the landscape.
Before ordering, draw a layout plan of the modules – this will show you how many racks you need. If you prefer a long, ready-joined rack, choose the segmented Iks (2–5 spaces).
First decide how many bikes need to be parked and where the rack will stand – outdoors on paving or indoors against a wall. Then consider whether it is important to lock the bike frame: U-shaped hoops are best for this. Finally, choose the material and colour to suit the surroundings.
Calculate based on peak season, when there are the most bikes, and leave some spare capacity. Some racks are made with different numbers of spaces or are modular, so spaces can be added later. Double-sided racks allow bikes to be parked on both sides and save space.
Most racks are bolted into firm paving with anchors, and some models can be set in concrete. Wall-mounted holders are fixed to the wall with anchors. For many models, anchors are included – this is stated in the product's technical data.
Yes. In this category you will find racks and wall-mounted holders designed for wider tyres and heavier bikes, as well as an e-bike station with a charging socket. The permitted tyre width or wheel gap for each model is stated in the product description. Compare it with your bike's tyres before buying.
Hot-dip galvanised and powder-coated steel is corrosion-resistant and lets you choose a colour. Stainless steel is unpainted, keeps its shiny look for a long time and suits prestigious locations. Both options are suitable for year-round outdoor use.
It is safest to lock the bike by the frame, not just the wheel – U-shaped hoops and similar racks are designed for this. Models with protective rubber keep the bike's paintwork free of scratches. Place the rack in a clearly visible and well-lit location.
Wall-mounted holders come in handy in bike rooms, garages and basements, where floor space is limited. A bike hung vertically takes up less space, and swivelling holders allow bikes to be placed closer together. Note the minimum room height stated in the description.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. When planning a larger bike parking area, the installation diagram in the “Technical information” section is also helpful.
