Product code: Tubo
A ring-shaped rack made from thick round tube – no corners to bump into, and the bike frame is easy to lock from either side.
The most common cause of theft at basic racks is not a cut lock, but the structure itself being unscrewed or bent. Tubo eliminates this weak point: in the concrete-in version, the 60 mm diameter tube is set 400 mm deep into the foundation, so your bike's security depends only on the lock you choose. The ring is fully rounded – there are no sharp edges to scratch yourself on when locking your bike or walking past in the dark.
| Shape | round ring |
| Ring diameter | 900 mm |
| Height | 935 mm |
| Tube diameter | 60 mm |
| Number of spaces | 2 bicycles |
| Material | welded steel, hot-dip galvanised and powder coated |
| Installation | set in concrete at 400 mm depth (extended frame) or bolted with a flange using 4 nylon anchors M10 – on paving or beneath paving blocks |
Ideal for new residential courtyards, squares by offices and public buildings, where a rack must be not only secure but also attractive – the minimalist ring looks like a piece of street furniture rather than a technical fixture.
More information: urbania.lt/dviraciu-stovai/
If the area is still being built, choose the concrete-in version – pour the foundation before laying the paving blocks. Where the paving is already finished, a bolt-down rack avoids having to break it up. When planning a row, leave enough space between rings for two bikes on each side.
First decide how many bikes need to be parked and where the rack will stand – outdoors on paving or indoors against a wall. Then consider whether it is important to lock the bike frame: U-shaped hoops are best for this. Finally, choose the material and colour to suit the surroundings.
Calculate based on peak season, when there are the most bikes, and leave some spare capacity. Some racks are made with different numbers of spaces or are modular, so spaces can be added later. Double-sided racks allow bikes to be parked on both sides and save space.
Most racks are bolted into firm paving with anchors, and some models can be set in concrete. Wall-mounted holders are fixed to the wall with anchors. For many models, anchors are included – this is stated in the product's technical data.
Yes. In this category you will find racks and wall-mounted holders designed for wider tyres and heavier bikes, as well as an e-bike station with a charging socket. The permitted tyre width or wheel gap for each model is stated in the product description. Compare it with your bike's tyres before buying.
Hot-dip galvanised and powder-coated steel is corrosion-resistant and lets you choose a colour. Stainless steel is unpainted, keeps its shiny look for a long time and suits prestigious locations. Both options are suitable for year-round outdoor use.
It is safest to lock the bike by the frame, not just the wheel – U-shaped hoops and similar racks are designed for this. Models with protective rubber keep the bike's paintwork free of scratches. Place the rack in a clearly visible and well-lit location.
Wall-mounted holders come in handy in bike rooms, garages and basements, where floor space is limited. A bike hung vertically takes up less space, and swivelling holders allow bikes to be placed closer together. Note the minimum room height stated in the description.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. When planning a larger bike parking area, the installation diagram in the “Technical information” section is also helpful.
