Product code: Stulpelis Tubo
A simple, modern steel bollard whose angled top and reflective cap help mark a restricted area even after dark.
A security bollard has two jobs: to physically stop vehicles from entering areas where people walk, and to be clearly visible. Tubo is made from 89 mm diameter welded steel tube, with its top cut at an angle and fitted with a cap that has a reflective coating. In headlights or street lighting the cap shines, showing where the road ends and the pedestrian zone begins.
| Model | Tubo |
| Material | welded steel tube |
| Diameter | 89 mm |
| Top | cut at an angle, with cap |
| Cap | with reflective coating |
| Version 1 | extended, set in concrete |
| Version 2 | with flange, bolted to the paving |
| Version 3 | with flange, installed beneath the paving |
| Optional | chain eyelets (on request) |
Pedestrian streets and squares, pavement edges, approaches to schools and nurseries, separating cycle paths, protecting shopping centre entrances and façades.
More information: urbania.lt/apsauginis-stulpelis/apsauginis-stulpelis-tubo/
In newly laid paving, the concrete-in version is the most secure. If the surface is already in place and you do not want to break it up, choose the flanged bollard bolted onto the paving. A flange beneath the paving conceals the fixing and looks the neatest, but it is installed when the surface is being laid or relaid.
Concrete bollards are heavy, so they are usually simply placed in position, and the stone chip finish goes well with concrete benches, planters and paving blocks. Metal bollards are slimmer, suit narrower spaces and are fixed to the base. Choose according to the space available and the style of other outdoor furniture.
Usually not – concrete bollards stand stably thanks to their weight and are hard to move by hand. It is enough to place them on a level, firm base. The exact weight of each model is stated in the product's technical data.
Depending on the model, a metal bollard can be extended and set in concrete, bolted to the paving with a flange, or mounted with a flange under the paving. In newly laid paving, the set-in-concrete version is the most reliable. If the surface is already in place and you do not want to break it up, choose a bolt-down bollard.
Low bollards suit the edges of lawns and flower beds – they mark the boundary without dominating the surroundings. Taller bollards are more visible to drivers and do not disappear in a snowdrift. At crossings and junctions, choose a height at which the bollard does not obscure children and traffic signs.
Choose the gaps so that pedestrians, pushchairs and wheelchairs can pass through comfortably, but a car cannot enter. It is worth agreeing the exact distances with the site project or the municipality. If needed, the bollards can be linked with a chain.
Some metal bollards have a cap with a reflective coating that shines in headlights and shows where the boundary is. A coloured cap can also highlight the purpose of the zone. This is especially useful near schools, crossings and car parks.
Yes, chain loops can be ordered for metal bollards on request. This creates a temporary or permanent barrier, for example to block a driveway. Specify whether you need loops when ordering.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. We will choose the installation method depending on whether the paving is already laid or is still being laid.
