Product code: 11
Low but the heaviest bollard in this series: 93 kg of concrete in a 600 mm high block that no driver will push aside and no passer-by will move.
When a bollard must not block the view but must withstand an accidental nudge from a car bumper, mass matters most. Model 11 is only 600 mm high, yet weighs 93 kg – the most of all the bollards in this series. The compact 300 × 300 mm block does not obstruct the view of children, pedestrians or traffic signs, and the stone chip surface gives it the look of stone.
| Model | 11 |
| Dimensions | 300 × 300 × 600 mm |
| Weight | 93 kg |
| Material | rapid-setting concrete, painted 0–2 mm sand |
| Surface finish | 2–8 mm stone chips |
| Standard | PN-EN 206+A1:2016-12 |
By pedestrian crossings and junctions where visibility matters, for protecting lawns and green areas from parking, and along the edges of courtyards and car parks.
If you need an even lower and lighter bollard for the edges of lawns or flower beds, choose model 26 (320 mm, 41 kg). Where the boundary must be visible from afar, the 820 mm high model 05 is more suitable.
Concrete bollards are heavy, so they are usually simply placed in position, and the stone chip finish goes well with concrete benches, planters and paving blocks. Metal bollards are slimmer, suit narrower spaces and are fixed to the base. Choose according to the space available and the style of other outdoor furniture.
Usually not – concrete bollards stand stably thanks to their weight and are hard to move by hand. It is enough to place them on a level, firm base. The exact weight of each model is stated in the product's technical data.
Depending on the model, a metal bollard can be extended and set in concrete, bolted to the paving with a flange, or mounted with a flange under the paving. In newly laid paving, the set-in-concrete version is the most reliable. If the surface is already in place and you do not want to break it up, choose a bolt-down bollard.
Low bollards suit the edges of lawns and flower beds – they mark the boundary without dominating the surroundings. Taller bollards are more visible to drivers and do not disappear in a snowdrift. At crossings and junctions, choose a height at which the bollard does not obscure children and traffic signs.
Choose the gaps so that pedestrians, pushchairs and wheelchairs can pass through comfortably, but a car cannot enter. It is worth agreeing the exact distances with the site project or the municipality. If needed, the bollards can be linked with a chain.
Some metal bollards have a cap with a reflective coating that shines in headlights and shows where the boundary is. A coloured cap can also highlight the purpose of the zone. This is especially useful near schools, crossings and car parks.
Yes, chain loops can be ordered for metal bollards on request. This creates a temporary or permanent barrier, for example to block a driveway. Specify whether you need loops when ordering.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. We will choose the installation method depending on whether the paving is already laid or is still being laid.
