Product code: KR-Stovas elektriniams paspirtukams
A double-sided scooter rack with integrated charging sockets – scooters stand tidily, locked and charging at the same time.
For an e-scooter owner, what matters is not only leaving it safely but also finding somewhere to charge the battery. This double-sided rack combines both: it holds ten scooters, and a 230 V charging socket at each space lets them charge while parked. The spaces are set 30 cm apart, with provision for personal locks.
| Number of spaces | 10 scooters |
| Number of charging sockets | 10 (one per space) |
| Sockets | 230 V, sealed IP65, with covers |
| Electrical connection | single-phase, 2.5 mm² cable with earth, cable outlet on the right |
| Maximum charging power | 3600 W in total for all sockets |
| Dimensions | width 1550 mm, height 600 mm |
| Space width | 10 cm |
| Distance between spaces | 30 cm |
| Construction | double-sided |
| Material | steel, galvanised and powder coated |
| Installation | 8 nylon anchors Ø10 × 80 mm with Ø7 × 80 mm screws (included) or set in concrete at a depth of 30 cm |
| Locking | provision for personal locks |
Approaches to offices and business centres, universities, hotels, courtyards of new residential developments and shopping centres that want to offer a convenient service to e-scooter users.
Plan the electrical connection in advance – the cable is easiest to lay before the paving goes down, and the work must be carried out by a qualified electrician. For scooters that do not need charging, the simpler KR series racks are sufficient.
First consider how many scooters need to be parked and where the rack will stand – outdoors or in a corridor against a wall. Then decide whether scooters will need to be locked and whether any of them will be electric. Based on this, you can choose a freestanding, double-sided, wall-mounted or lockable rack.
Yes, the category includes racks designed for heavier e-scooters and a station with charging sockets. Before buying, check the suitable scooter tube diameter stated in the description and compare it with your scooter. A station with charging sockets will need an electrical connection.
Many of our racks allow the scooter to be locked – this is stated in the product's technical data. Some models have spaces for personal locks. A lockable rack is especially useful at schools and offices, where scooters are left for the whole day.
Freestanding racks are bolted to the paving with anchors, and some can also be set in concrete. Wall-mounted holders are fixed to the wall with anchors and save space in corridors, stairwells or basements. A fixed rack does not fall over and cannot be pushed away.
A single-sided rack is placed along a wall or fence and takes up little space. A double-sided rack is placed in an open area: scooters can be parked on both sides, so more spaces fit in the same area. For a school yard accessible from all sides, a double-sided rack is usually more convenient.
Yes. Low racks, into which children can easily put their scooters themselves, are suitable for kindergartens and primary schools. Some racks have height-adjustable clamps, so they suit scooters of different sizes.
The racks are made of galvanised steel, which is additionally powder-coated, or of stainless steel. Both materials are corrosion-resistant and suitable for outdoor use. On some models, the holding handles are rubber-coated to protect the scooter from scratches.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. During installation we will fix the rack to the paving or wall, depending on the model.
