Product code: LIFT-1
The simplest way to get a bike off the floor: it hangs vertically and takes up only a narrow strip of wall.
In a garage, storeroom or office bike room, a bike parked horizontally takes up about half a square metre. Hung vertically on a LIFT-1, it projects from the wall only as far as the bike is long, and its width shrinks to the width of the handlebars. The holder is made of galvanised Ø18 mm tube and is fixed with six anchors.
| Capacity | 1 bike |
| Length | 500 mm |
| Width | 140 mm |
| Material | galvanised steel, Ø18 mm tube |
| Tyre width | up to 65 mm |
| Minimum room height | 2000 mm |
| Fixing | 6 Ø8 mm wall anchors (included) |
Bike rooms in apartment buildings, office basements, garages, storerooms and bike rental points where as many bikes as possible need to fit into a small area.
Before drilling, make sure the room is at least 2 m high and the wall is masonry or concrete. When installing several holders, hang the bikes alternately at different heights – the handlebars will not catch on each other and the gaps can be smaller. If you need the bike to swivel to the side, choose the LIFT-1 PREMIUM.
First decide how many bikes need to be parked and where the rack will stand – outdoors on paving or indoors against a wall. Then consider whether it is important to lock the bike frame: U-shaped hoops are best for this. Finally, choose the material and colour to suit the surroundings.
Calculate based on peak season, when there are the most bikes, and leave some spare capacity. Some racks are made with different numbers of spaces or are modular, so spaces can be added later. Double-sided racks allow bikes to be parked on both sides and save space.
Most racks are bolted into firm paving with anchors, and some models can be set in concrete. Wall-mounted holders are fixed to the wall with anchors. For many models, anchors are included – this is stated in the product's technical data.
Yes. In this category you will find racks and wall-mounted holders designed for wider tyres and heavier bikes, as well as an e-bike station with a charging socket. The permitted tyre width or wheel gap for each model is stated in the product description. Compare it with your bike's tyres before buying.
Hot-dip galvanised and powder-coated steel is corrosion-resistant and lets you choose a colour. Stainless steel is unpainted, keeps its shiny look for a long time and suits prestigious locations. Both options are suitable for year-round outdoor use.
It is safest to lock the bike by the frame, not just the wheel – U-shaped hoops and similar racks are designed for this. Models with protective rubber keep the bike's paintwork free of scratches. Place the rack in a clearly visible and well-lit location.
Wall-mounted holders come in handy in bike rooms, garages and basements, where floor space is limited. A bike hung vertically takes up less space, and swivelling holders allow bikes to be placed closer together. Note the minimum room height stated in the description.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. When planning a larger bike parking area, the installation diagram in the “Technical information” section is also helpful.
