Product code: B061CMUR
A wall-mounted holder with six clamps – the scooter is inserted by its handlebar tube and stays firmly gripped.
In a narrow corridor or stairwell, scooters are usually leaned against the wall and fall onto each other. This holder lines them up in a row: when you insert the scooter's front tube into the clamp, you will feel it tighten, and the scooter cannot be pulled out accidentally. The ends of the clamps have holes for a security cable or padlock.
| Capacity | 6 scooters |
| Material | galvanised and painted metal |
| Holder width | 106 cm |
| Projection from the wall with clamps | 24.5 cm |
| Suitable front tube diameter | up to 50 mm |
| Colour | anthracite |
| Fixing | to the wall with 8 anchors |
| Mounting plates | 15 × 15 cm |
School corridors and cloakrooms, apartment block stairwells, office entrance halls and sports clubs, where scooters need to be stored indoors.
If you want to install the holder on the paving rather than on a wall, choose the bolt-down rack B061C6 from the same series. Before buying, check the diameter of your scooters' handlebar tube – it must be no more than 50 mm.
First consider how many scooters need to be parked and where the rack will stand – outdoors or in a corridor against a wall. Then decide whether scooters will need to be locked and whether any of them will be electric. Based on this, you can choose a freestanding, double-sided, wall-mounted or lockable rack.
Yes, the category includes racks designed for heavier e-scooters and a station with charging sockets. Before buying, check the suitable scooter tube diameter stated in the description and compare it with your scooter. A station with charging sockets will need an electrical connection.
Many of our racks allow the scooter to be locked – this is stated in the product's technical data. Some models have spaces for personal locks. A lockable rack is especially useful at schools and offices, where scooters are left for the whole day.
Freestanding racks are bolted to the paving with anchors, and some can also be set in concrete. Wall-mounted holders are fixed to the wall with anchors and save space in corridors, stairwells or basements. A fixed rack does not fall over and cannot be pushed away.
A single-sided rack is placed along a wall or fence and takes up little space. A double-sided rack is placed in an open area: scooters can be parked on both sides, so more spaces fit in the same area. For a school yard accessible from all sides, a double-sided rack is usually more convenient.
Yes. Low racks, into which children can easily put their scooters themselves, are suitable for kindergartens and primary schools. Some racks have height-adjustable clamps, so they suit scooters of different sizes.
The racks are made of galvanised steel, which is additionally powder-coated, or of stainless steel. Both materials are corrosion-resistant and suitable for outdoor use. On some models, the holding handles are rubber-coated to protect the scooter from scratches.
Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. During installation we will fix the rack to the paving or wall, depending on the model.
