LISANDRA Steel Outdoor Bench without Backrest

Product code: LISANDRA

LISANDRA's leg structure combines 4 mm and 8 mm steel sheet, and its 1900 mm length makes it one of our longest backless benches.

  • Dimensions: 1900 × 470 × 450 mm
  • Legs: steel sheet 4 and 8 mm
  • Metal finish: galvanised and powder coated, or stainless steel
  • Seat: impregnated spruce
Have any questions about this item? Ask

LISANDRA – a long backless bench with natural spruce

The longer a backless bench, the more people can use it at once – from both sides. The 1900 mm long LISANDRA seat in impregnated spruce rests on legs that combine 4 mm and 8 mm steel sheet: the thicker sheet carries the load, the thinner one adds a sense of lightness.

Advantages

  • Combined sheet legs – 4 and 8 mm steel.
  • 1900 mm seat – room for several people on both sides.
  • Natural spruce – impregnated and warm to the touch.
  • Corrosion protection – galvanising with powder coating, or stainless steel.

Technical data

Dimensions (length × width × height)1900 × 470 × 450 mm
Legssteel sheet 4 and 8 mm
Metal finishgalvanised and powder coated, or stainless steel
Seatimpregnated spruce
Backrestnone

Where it fits

Long stretches of promenade, university courtyards, busy bus stops and spectator areas at sports grounds.

Tip

Clean the spruce seat every few years and apply a protective treatment so the wood keeps its colour longer. If you are looking for a shorter backless bench, SATURN (1500/1800 mm) is a good fit.

Bench with or without a backrest – which to choose?

For seating areas, parks and courtyards, benches with a backrest are a better fit – they are more comfortable for longer stays. In transit areas, at bus stops and near schools, backless benches are usually enough; they take up less space and can be sat on from both sides. For longer sitting, models with armrests or a higher backrest are more comfortable for older people.

Concrete, steel or with wood – what's the difference?

Concrete benches are heavy and stable, suitable for squares and busy places. Steel benches with a galvanised and painted frame are lighter, so they are fixed to the base. Wooden slats on the seat are warmer and more pleasant than metal or concrete.

Does an outdoor bench need to be fixed?

Heavy concrete benches usually stand stably without anchors. In public places it is recommended to fix steel benches to the base so that they are not moved around or carried off – anchors are included for some models. When placing on sand or gravel, small concrete footings are first poured under the legs.

What wood is used and how should it be cared for?

Seats use impregnated and painted black alder, spruce, pine or other softwood, as well as weather-resistant acacia. For some models, composite can be chosen instead of wood. Clean the wood regularly, and when the coating wears, renew it with protective paint or oil.

Can I choose the colour of the bench?

The frames of steel benches are powder-coated, in most cases in the RAL palette. For concrete benches you can choose stone chips in different shades, and the wood is painted or oiled. Check the available options when ordering.

Are there modular and curved benches?

Yes. Modular benches allow you to create a seating line of the desired length or shape, and curved segments a circular seating area around a tree or flower bed. There are also benches with an integrated bike rack, which suit school or office entrances.

Can an outdoor table be matched with benches?

Yes, it is worth choosing a table together with benches from the same series – the surroundings then look coherent and the dimensions match each other. Like benches, outdoor tables must be sturdy, moisture-resistant and easy to maintain. You can also choose a waste bin from the same line for the seating area.

Do you deliver and install benches?

Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. Heavy concrete benches are delivered and positioned with lifting equipment.

Often bought together
A slim square waste bin with spruce timber slats – compact yet tall, so it is easy to throw rubbish ..
A steel and softwood waste bin with ashtray – the OPAL III design variant for public spaces where sm..
An additional service – delivery of purchased urban infrastructure equipment to the site and its ins..
Related Products
KOLIBER is a bench with a high backrest and steel plate legs; the same range also includes the backl..
A steel and softwood waste bin with ashtray – the OPAL III design variant for public spaces where sm..
KOLIBER BA is the backless bench in the KOLIBER range, which can be used from both sides. The legs a..
NEL SA is a bench with a backrest whose 900 mm height and 560 mm depth let you lean back comfortably..
NARCYZ is an all-metal bench: both the seat and the backrest are formed from steel tubes, so there i..
Alternative products
GALIA II – a 1800 mm long backless bench with 8 mm steel sheet legs and a wooden seat.Dimensions: 18..
KOLIBER BA is the backless bench in the KOLIBER range, which can be used from both sides. The legs a..
DIONA is an understated backless bench with sheet steel legs, suitable both outdoors and in covered ..
Write
Call us