GALIA II Steel Outdoor Bench without Backrest

Product code: KRO GALIA II

GALIA II – a 1800 mm long backless bench with 8 mm steel sheet legs and a wooden seat.

  • Dimensions: 1800 × 470 × 450 mm
  • Legs: steel sheet 8 mm
  • Metal finish: galvanised and powder coated, or stainless steel
  • Seat: 5 softwood slats
  • Installation: bolted down with nylon anchors
Have any questions about this item? Ask

GALIA II – a backless bench for waiting areas

At bus stops, near schools or outpatient clinics, people usually wait for a few minutes to a quarter of an hour – they need a reliable, clean place to sit, not a lounge chair. With its 470 mm deep seat and 8 mm steel sheet legs, GALIA II is made for exactly these places.

Advantages

  • Comfortable depth – 470 mm seat without a backrest.
  • 8 mm sheet legs – strong and stable.
  • Wooden seat – 5 softwood slats 180 × 9 × 3.7 cm.
  • Easy to clean – a simple shape with no hard-to-reach corners.

Technical data

Dimensions (length × width × height)1800 × 470 × 450 mm
Legssteel sheet 8 mm
Metal finishgalvanised and powder coated, or stainless steel
Seating5 softwood slats 180 × 9 × 3.7 cm
Backrestnone
Installationbolted to the base with nylon anchors

Where it fits

Bus and trolleybus stops, entrances to outpatient clinics and schools, sports arena approaches and shopping centre car parks.

Tip

GALIA II and DIONA have identical dimensions (1800 × 470 × 450 mm) – only the leg shape differs, so choose according to design. In heavily used locations, fix the bench to the base.

Bench with or without a backrest – which to choose?

For seating areas, parks and courtyards, benches with a backrest are a better fit – they are more comfortable for longer stays. In transit areas, at bus stops and near schools, backless benches are usually enough; they take up less space and can be sat on from both sides. For longer sitting, models with armrests or a higher backrest are more comfortable for older people.

Concrete, steel or with wood – what's the difference?

Concrete benches are heavy and stable, suitable for squares and busy places. Steel benches with a galvanised and painted frame are lighter, so they are fixed to the base. Wooden slats on the seat are warmer and more pleasant than metal or concrete.

Does an outdoor bench need to be fixed?

Heavy concrete benches usually stand stably without anchors. In public places it is recommended to fix steel benches to the base so that they are not moved around or carried off – anchors are included for some models. When placing on sand or gravel, small concrete footings are first poured under the legs.

What wood is used and how should it be cared for?

Seats use impregnated and painted black alder, spruce, pine or other softwood, as well as weather-resistant acacia. For some models, composite can be chosen instead of wood. Clean the wood regularly, and when the coating wears, renew it with protective paint or oil.

Can I choose the colour of the bench?

The frames of steel benches are powder-coated, in most cases in the RAL palette. For concrete benches you can choose stone chips in different shades, and the wood is painted or oiled. Check the available options when ordering.

Are there modular and curved benches?

Yes. Modular benches allow you to create a seating line of the desired length or shape, and curved segments a circular seating area around a tree or flower bed. There are also benches with an integrated bike rack, which suit school or office entrances.

Can an outdoor table be matched with benches?

Yes, it is worth choosing a table together with benches from the same series – the surroundings then look coherent and the dimensions match each other. Like benches, outdoor tables must be sturdy, moisture-resistant and easy to maintain. You can also choose a waste bin from the same line for the seating area.

Do you deliver and install benches?

Yes, we deliver and install throughout Lithuania – contact us on +370 652 32015, info@viskasmiestui.lt. Heavy concrete benches are delivered and positioned with lifting equipment.

Often bought together
A slim-profile waste bin with ashtray and 80 l capacity – just 300 mm deep, so it can stand along a ..
A tall steel waste bin with an almost square base and an 80 l bucket – made in several model version..
An additional service – delivery of purchased urban infrastructure equipment to the site and its ins..
Related Products
KARMEN I – the basic model of the KARMEN line: sheet steel sides and a natural spruce seat with back..
The second bench in the KARMEN line – the same comfortable dimensions, but with differently designed..
The ERIS frame is welded from 45 × 45 mm square section – a strictly geometric bench with a high bac..
A slim-profile waste bin with ashtray and 80 l capacity – just 300 mm deep, so it can stand along a ..
FREZJA – a light backless bench in square profile, made in two lengths.Length: 1600 mm or 1900 mmWid..
Alternative products
The ASTERIA bench is delivered with all fixing anchors, so it can be fixed to the paving straight aw..
SATURN is a backless bench with steel plate legs, available in 1500 and 1800 mm lengths.Length: 1500..
LISANDRA's leg structure combines 4 mm and 8 mm steel sheet, and its 1900 mm length makes it one of ..
DIONA is an understated backless bench with sheet steel legs, suitable both outdoors and in covered ..
Write
Call us